Measure and/or protection of voltage transformers. Indoor service up to 36 kV, isolated in epoxy resin.

      • One pole (phase-earth)
      • Two pole (phase-phase)
      • Pluggable

Showing all 7 results

VKPE-12.
Insulation Voltage 12kV.
Phase-to-Earth Connection.

HV Voltage transformer for measuring and/or protecting up to 12 kV, used for measurement instruments, meters, relays and other similar devices. Designed to be used indoors.

The primary winding is occluded in class E epoxy resin, the magnetic circuit and the secondary winding are outside the resin enclosure.

Because of this construction there is no risk of projection of fragments.

The transformer VKPE-12 is a phase-to-earth transformer; that is, a single-phase transformer, used to keep one of the ends of the primary winding directly connected to earth.

The VKPE transformers family has been designed taking into account the Environment as no oils or fluorinated gases are used as insulating material.

It is mechanically resistant and damp-proof, oil-proof, dust-proof and resists most chemical products.

Manufactured in accordance with IEC 61869:1 and IEC 61869:3 standards.

 

VKPE-12 Catalog
User Manual
Accesories Catalog
Plane (.dwg)

VKPE-24.
Insulation Voltage 24kV.
Phase-to-Earth Connection.

HV Voltage transformer for measuring and/or protecting up to 24 kV, used for measurement instruments, meters, relays and other similar devices. Designed to be used indoors.

The primary winding is occluded in class E epoxy resin, the magnetic circuit and the secondary winding are outside the resin enclosure.

Because of this construction there is no risk of projection of fragments.

The transformer VKPE-24 is a phase-to-earth transformer; that is, a single-phase transformer, used to keep one of the ends of the primary winding directly connected to earth.

The VKPE transformers family has been designed taking into account the Environment as no oils or fluorinated gases are used as insulating material.

It is mechanically resistant and damp-proof, oil-proof, dust-proof and resists most chemical products.

Manufactured in accordance with IEC 61869:1 and IEC 61869:3 standards.

 

VKPE-24 Catalog
User Manual
Accesories Catalog
Plane (.dwg)

VKPE-36.
Insulation Voltage 36kV.
Phase-to-Earth Connection.

HV Voltage transformer for measuring and/or protecting up to 36 kV, used for measurement instruments, meters, relays and other similar devices. Designed to be used indoors.

The primary winding is occluded in class E epoxy resin, the magnetic circuit and the secondary winding are outside the resin enclosure.

Because of this construction there is no risk of projection of fragments.

The transformer VKPE-36 is a phase-to-earth transformer; that is, a single-phase transformer, used to keep one of the ends of the primary winding directly connected to earth.

The VKPE transformers family has been designed taking into account the Environment as no oils or fluorinated gases are used as insulating material.

It is mechanically resistant and damp-proof, oil-proof, dust-proof and resists most chemical products.

Manufactured in accordance with IEC 61869:1 and IEC 61869:3 standards.

 

VKPE-36 Catalog
User Manual
Accesories Catalog
Plane (.dwg)

VKE-24.
Insulation Voltage 24kV.
Phase-to-Earth Connection. Plug Type.

HV Voltage transformer for measuring and/or protecting up to 24 kV, to be used in HV cells gas insulated.

This model VKE-24 allows a primary connection through a plug designed according to UNE-EN 50181.

The transformer is shielded by means a metallic enclosure that covers the resin body and allows it installation without any distance between them because the surface of the device is earthed and allows a better space optimization.

The transformers can be supplied unshielded on request for their installation in open cells, always taking into account the safety distances between them.

The primary winding is occluded in class E epoxy resin, the magnetic circuit and the secondary winding are outside the resin enclosure. Because of this construction there is no risk of projection of fragments.

Possibility of installation in any position. Manufactured in accordance with IEC 61869:1 and IEC 61869:3 standards.

 

VKE-24 Catalog
User Manual
Plane (.dwg)

VKE-36.
Insulation Voltage 36kV.
Phase-to-Earth Connection. Plug Type.

HV Voltage transformer for measuring and/or protecting up to 36 kV, to be used in HV cells gas insulated.

This model VKE-36 allows a primary connection through a plug designed according to UNE-EN 50181.

The transformer is shielded by means a metallic enclosure that covers the resin body and allows it installation without any distance between them because the surface of the device is earthed and allows a better space optimization.

The transformers can be supplied unshielded on request for their installation in open cells, always taking into account the safety distances between them.

The primary winding is occluded in class E epoxy resin, the magnetic circuit and the secondary winding are outside the resin enclosure.Because of this construction there is no risk of projection of fragments.

Possibility of installation in any position. Manufactured in accordance with IEC 61869:1 and IEC 61869:3 standards.

 

VKE-36 Catalog
User Manual
Plane (.dwg)

VCJ-36 TENSIÓN DE AISLAMIENTO 36 KV  CONEXIÓN FASE-FASE

VCJ-36.
Insulation Voltage 36kV.
Phase-to-Phase Connection.

HV Voltage transformer for measuring and/or protecting up to 36 kV, used for measurement instruments, meters, relays and other similar devices. Designed to be used indoors.

The VCJ-36 is a phase-to-phase transformer, that is, a two phase or two poles transformer. In order to guarantee its dielectric level, it is filled with SF6 gas.

This transformer can be anti explosive or not, depending on customer requirements.

The anti explosive version disposes of a high quality safety valve. The function of this valve is to eliminate internal overpressures that can appear due to long term defects, in the way to avoid violent projections of fragments.

It is mechanically resistant and damp-proof, oil-proof, dust-proof and resists most chemical products.

Possibility of installation in any position.

Manufactured in accordance with IEC 61869:1 and IEC 61869:3 standards.

ARM.
Resistances Cabinet.

The load resistors cabinet ARM consists of a resistance box, a non-sealable terminal strip and a 2A circuit breaker, located in a metal cabinet with ventilation and connections protected by a sealable cover to prevent tampering.

Box load resistors, is comprised of three load resistors contained in a metal box with surface treatment to prevent corrosion and to evacuate the heat.

It is designed for indoor use. On request it can be manufactured for outdoor service and with different configurations.

Its function is to consume the necessary power for the transformer to work at least at 25% of the accuracy burden in cases where the loads connected to the unit (meters, relays,etc.) do not reach the minimum necessary to guaranteed measurement accuracy.

 

ARM Catalog
User Manual ARM