El transformador AKH-03 está diseñado para la detección de corrientes homopolares. Este transformador realiza la suma de las tres corrientes dentro de un solo núcleo magnético, lo cual da como resultado una corriente en el secundario del transformador proporcional en módulo a la suma de las corrientes homopolares.

La parte activa está ocluida en resina de poliuretano de clase de aislamiento B (s/norma UNE-EN 60085), color negro. Tiene gran resistencia química.

Fabricado de acuerdo con las normas UNE-EN 61869-1 y UNE-EN 61869-2.

Box load resistors, is comprised of three load resistors contained in a metal box with surface treatment to prevent corrosion and to evacuate the heat.

It is designed for indoor use. On request it can be manufactured for outdoor service and with different configurations.

Its function is to consume the necessary power for the transformer to work at least at 25% of the accuracy burden in cases where the loads connected to the unit (meters, relays,etc.) do not reach the minimum necessary to guaranteed measurement accuracy.

The cabinet is manufactured from sheet steel (lacquered or stainless, according to requirements) and features a 3 mm double-bit lock operated by a cam, sealed via a slotted screw to prevent unauthorized tampering.

It is designed for indoor service. Upon request, it can be manufactured for outdoor service, as well as in various other configurations.

Its function is to consume the necessary power to ensure the transformers operate at a minimum of 25% of their rated accuracy burden. This applies in cases where the loads connected to the device (meters, relays, etc.) do not reach the minimum threshold required to guarantee measurement accuracy.

The cabinet is manufactured from sheet steel (lacquered or stainless, according to requirements) and features a 3 mm double-bit lock operated by a cam, sealed via a slotted screw to prevent unauthorized tampering.

It is designed for indoor service. Upon request, it can be manufactured for outdoor service, as well as in various other configurations.

Its function is to consume the necessary power to ensure the transformer operates between 25% and 100% of its rated accuracy burden. This applies in cases where the loads connected to the device (meters, relays, etc.) do not reach the minimum threshold required to guarantee measurement accuracy.

The active part is occluded in class E epoxy resin (in accordance with IEC 60085 standard), brown colour. It is mechanically resistant and damp-proof, oil-proof, dust-proof and resists most chemical products.

Openable design that facilitates its application in existing installations without the need to make modifications to it.

Possibility of installation in any position.

Manufactured in accordance with IEC 61869:1 and IEC 61869:2 standards.

The primary winding is occluded in class E epoxy resin, the magnetic circuit and the secondary winding are outside the resin enclosure.

Because of this construction there is no risk of projection of fragments.

The transformer VKPE-12 is a phase-to-earth transformer; that is, a single-phase transformer, used to keep one of the ends of the primary winding directly connected to earth.

The VKPE transformers family has been designed taking into account the Environment as no oils or fluorinated gases are used as insulating material.

It is mechanically resistant and damp-proof, oil-proof, dust-proof and resists most chemical products.

Manufactured in accordance with IEC 61869:1 and IEC 61869:3 standards.

The primary winding is occluded in class E epoxy resin, the magnetic circuit and the secondary winding are outside the resin enclosure.

Because of this construction there is no risk of projection of fragments.

The transformer VKPE-24 is a phase-to-earth transformer; that is, a single-phase transformer, used to keep one of the ends of the primary winding directly connected to earth.

The VKPE transformers family has been designed taking into account the Environment as no oils or fluorinated gases are used as insulating material.

It is mechanically resistant and damp-proof, oil-proof, dust-proof and resists most chemical products.

Manufactured in accordance with IEC 61869:1 and IEC 61869:3 standards.

The primary winding is occluded in class E epoxy resin, the magnetic circuit and the secondary winding are outside the resin enclosure.

Because of this construction there is no risk of projection of fragments.

The transformer VKPE-36 is a phase-to-earth transformer; that is, a single-phase transformer, used to keep one of the ends of the primary winding directly connected to earth.

The VKPE transformers family has been designed taking into account the Environment as no oils or fluorinated gases are used as insulating material.

It is mechanically resistant and damp-proof, oil-proof, dust-proof and resists most chemical products.

Manufactured in accordance with IEC 61869:1 and IEC 61869:3 standards.

The active part is occluded in class E epoxy resin (in accordance with IEC 60085 standard), brown colour. It is mechanically resistant and damp-proof, oil-proof, dust-proof and resists most chemical products.

Possibility of installation in any position.

In this series of transformers, the dimensions depend both on the number of secondaries and on the burden and accuracy class of the secondary ones.

Manufactured in accordance with IEC 61869:1 and IEC 61869:2 standards.

The primary winding is occluded in class E cycloaliphatic resin (in accordance with IEC 60085 standard), in brown colour. It is specially resistant to the combined effects of atmospheric elements and electrical fields.

The base and other metallic elements are stainless or they have been treated to avoid corrosion.

Manufactured in accordance with IEC 61869:1 and IEC 61869:2 standards.